Designs for Stairs with a Landing – When making stairs with a platform or landing in the middle, a common mistake is to first build a landing at an arbitrary level, then design and build the upper and lower staircases. Ninety-five percent of the time this results in the top and lower staircases having noticeably different geometry. By analyzing your entire staircase first, then building your platform at the correct level, you may be with matching flights.
Above all, you want the Rise Per Step for both the top and bottom flights to be the same. Your local building code probably requires this, and even irrespective of code, the stairs will look and feel better if Rise Per Step, Run Per Step and all the other figures are identical for both flights.
So that you can ensure that you have equal Rise Per Step on both flights, first design a phantom set of stairs using your total Overall Rise like you’re making one long pair of stairs instead of breaking it in two. (You don’t really need to worry about the Overall Run at this point. ) Take your Overall Rise and divide it by your local building code maximum Rise Per Step (7-1/2 inches is a common value. ) This tells you the quantity of steps you will need. Since you can’t have a fraction of a step, round this number around get an integer, then divided your Overall Rise by this new number to get your calculated Rise Per Step. This post related designs for stairs with a landing, designs for hall stairs and landing, staircase landing decor, staircase landing code, staircase landing design.
See also: Wrought Iron Spiral Staircase
Designs for Stairs with a Landing Gallery