Building Stairs for a Deck

Building Stairs For A Deck Without A Landing St Louis Mo By Archadeck Pictures 75

Building Stairs for a Deck – Building stairs is one of the most challenging, time consuming building projects for almost all builders. Not all stair construction methods are equal. Many are much more user friendly and cost efficient than others. Of course , in this tight economy, you need to save every penny on your deck stairs, basement stairs, or interior stairs. It’s interesting that many people with minimal experience are willing to tackle a simple deck project at last, but hit a brick wall on the subject of building stairs.

Some specifics of building stairs for a deck.
The riser is the distance from the the top of the step to the next step, usually anywhere from 6″ to 8″ high. ( 8 1/4″ maximum). The tread is a step itself that you crunch, usually 9″ to 12″ wide. When you add the riser and the tread together it should be between 17″ to 21″ with 18″ to 19″ being your average. The stringer is the carriage that supports the treads and the risers, usually a 2″ x 12″ or 2″ x 10″ cut to fit the steps.. How to figure the steps: Measure the distance from floor or ground into the top of your landing, top of deck or the next floor. Example, If the distance from the ground to the top of the deck is 45″ high, you divide by 7″ or 8″ to find how high each step will be. In this case find that 71/2″ will be the height of each step, which show that you will have 6 risers and 5 treads.

Building Stairs For A Deck And Steps With The Best Wood Photos 33

To cut your stringer, take your square make it on the edge on your stringer to read 71/2″ one side and 11″ opposed to this of the square; (11″ for using a 2″ x 12″ or 2- 5/4 x 6″ deck boards). Draw 5 steps with 6 risers. Cut off the thickness off your bottom riser 1″ or 1 1/2″ to allow for a 7 1/2″ total. You are now ready to assemble your stairs. Also allow 1″ – 1 1/4″ of tread to extend beyond risers as nosing for treads. You may want to practice upon an old board if you are not sure. Or you can buy the pre-made stringers at the lumber yard, nevertheless, you don’t have the option to choose the height of your risers. This post related building stairs for a deck with landing, building stairs for a deck calculator, building stairs for a deck australia nz, building step for a deck, diy stairs for a deck, building curved stairs for a deck.

Recent search terms:

  • allintitle:floor plan for small house with 3 bedrooms
  • allintitle:small house architecture ideas

See also:

Building Stairs for a Deck Gallery

Share this post